NAVAIR 01-1A-505-2
006 04
TO 00-25-255-1
Page 66
TM 1-1500-323-24-2
25. GASKETS FOR FLANGE MOUNT RECEPTACLES.
28. SEALING PLUGS. See WP 008 03 for detailed
information on part number M83723/28. See WP 007
neoprene or silicone and are used to seal receptacle
03 for detailed information on part number MS27488
flange to mounting structure. See WP 009 03 for detailed
sealing plug. Plugs are inserted, large end first, to fill a
information on gasket 229401. Information on gasket
cavity in a connector insert. Its function is to seal all
MS51007 is in Figure 25 and Figure 26 for gasket A-A-
unoccupied openings in insert, especially in
52481. See Note following paragraph 2 this WP on AS,
environmental connectors. See Note following
M and MS prefix.
paragraph 2 this WP on AS, M and MS prefix.
26. MOUNTING NUT FOR JAM NUT RECEPTACLES.
29. MOUNTING PLATES FOR FLANGE MOUNT
Part number MS3186 mounting nut is used to
mechanically mount a receptacle to a structure
WP on AS, M and MS prefix. Mounting plates are
(Figure 27).
available in three types: heavy, medium and light
duty. The M85528/1 , M85528/2 and M85528/3 have
27. RUBBER BUSHINGS. Part number MS3420
been superseded by the M85049 Mounting Plates. See
bushings standard material and color is black
WP 007 03 for detailed information on the following:
neoprene. The primary use is to provide a cushion for
wires at connector to aid strain relief. See WP 007 03
a.
Heavy Duty Mounting Plate M85049/94.
for detailed information. See Note following
paragraph 2 this WP on AS, M and MS prefix.
b.
Medium Duty Mounting Plate M85049/95.
c.
Light Duty Mounting Plate M85049/96.