NAVAIR 01-1A-505-2
009 03
TO 00-25-255-1
Page 20
TM 1-1500-323-24-2
20. GASKETS FOR FLANGE MOUNT RECEPTACLES.
22. RUBBER BUSHINGS. See WP 008 03 for detail
information on rubber bushing MS3420. The primary
neoprene or silicone and are used to seal the receptacle
use is to provide a cushion for wires at connector and
flange to the mounting structure. The 229401 gasket is
to aid strain relief. Bushing standard material and
provided for reference only, as it has been cancelled
color is black neoprene. The 27290-1 bushing is provided
without replacement. (Figure 14).
for reference only, as it has been cancelled without
replacement. (Figure 15). See Note following
21. MOUNTING NUT FOR JAM NUT RECEPTACLES.
paragraph 2 this WP on AS, M and MS prefix.
Part number MS3186 mounting nut is used to
mechanically mount the receptacle to a structure. See
23. SEALING PLUGS. See WP 008 03 for detail
WP 006 04 for detail information on the MS3186
information on the MS27488 plugs. The sealing plugs
are inserted to fill a cavity in a connector insert. The
following paragraph 2 this WP on AS, M and MS
plugs are inserted large end first. Its function is to seal
prefix.
all unoccupied openings in the insert, especially in
environmental connectors. See Note following
paragraph 2 this WP on AS, M and MS prefix.