TM 1-1510-253-CL
GO AROUND WITH BOTH PILOTS' TRIM
SYSTEM INOPERATIVE
NOTE
Very high push forces will be required if
flaps are retracted with stabilizer trim in
extreme nose up position. If a go-around
or balked landing is required when stabi-
lizer trim is stuck in an extreme nose up
position, do not retract flaps immediately.
1. POWER -- SET As Required
NOTE
Application of power increases push
force requirements.
2. FLAPS -- Retract in Increments
NOTE
Flap retraction increases push force re-
quirements.
3. Airspeed -- As Required to Reduce
Elevator Forces
4. LANDING GEAR Handle -- UP (when
feasible)
INADVERTENT PUSHER
SAS MALFUNCTIONS
Pull forces required to overpower stick
pusher may exceed 60 pounds. Failure to
override could result in personnel injury
or damage to equipment.
E-39