TM 1-1520-264-23
Figure 5-8. Starter Flange
NOTE
Either probe identified in paragraph 5.8.3.1 may be used depending primarily on the ease of accessibility
and user friendliness. If the probes are changed, steps 5.8.3.5 b. (1), (2), and (3) shall be repeated each
time a change is made.
5.8.3.7
Marking and Recording of Inspection Results. Mark and record the inspection results as required by paragraph
1.3.
5.8.4
Backup Method. None required.
5.8.5
System Securing. The starter flange, if removed, requires installation in accordance with the applicable
technical manuals listed in Table 1-1.
5.9 ENGINE SHROUD (PT).
5.9.1
Description (Figure 5-1. Index No. 9). The engine shroud is mounted on top of the engine.
5.9.2
Defects. This inspection is used to verify crack indications found visually. No cracks are
allowed.
5.9.3
Primary Method. Fluorescent Penetrant.
5-16