Table 1-8. Materials Used for NDI - Continued
Prolonged breathing of vapor from organic solvents, degreasers, or paint thinners is
dangerous. Use respirators in confined areas per Occupational and Environmental
Health Respiratory Protection Program (TB MED 502 (DLAM 1000.2)). Have adequate
ventilation. Avoid prolonged skin contact. Wear rubber gloves and goggles.
Following all magnetic particle inspections, clean part by dipping or spraying with dry-cleaning solvent, P-D-680,
Type II. Wipe dry with a clean, low-lint cloth, MIL-C-85043, or equivalent.
After post cleaning has been performed, the original protective finish or approved alternate must be restored to
the part or area by appropriate personnel. Refer to applicable technical manuals listed in Table 1-1.