SHEET METAL SHOP
SHEET METAL BRAKE TABLE
Tools And Special Tools:
Tool Kit, Power Plant
Torque Wrench 0-600 in. lbs. (5120-01-530-2311)
Sheet Metal Brake Support Table
Sheet Metal Brake Adapter Plate
Hexagon Head Cap Screw
Personnel Required: (1)
CMF 15 Series
15F, Electrical Repairer
During installation of components the same hardware should be used so as to
maintain the original integrity of the shop sets.
Inspect bolts attaching sheet metal brake table assembly to floor for looseness. If there are any damaged bolts or
threaded inserts, replace as instructed in WP 0026 00. Visually inspect table structure for cracked or broken
welds. Damaged welds may be repaired by welding cracks and broken areas.