3-11. PNVS NSA INSTALLATION ON NIGHTSIDE TEST BENCH. (CONT)
f. Pneumatic System Turn-On.
HIGH PRESSURE AIR
To prevent injury and equipment damage, do not perform this procedure
until all cable connections, switch settings, adapter installation, and UUT
mounting have been completed. When pneumatic system is inflated, E/O
test bench is capable of movement. If an attempt is made to mount TADS
NSA with pneumatic system pressurized, injury or equipment damage may
occur. Test bench could move and TADS NSA could be dropped causing
injury or damage.
(1) Verify that van air supply is on (TM 11-6625-3085-12).
(2) On nightside test bench (1, figure 3-16), rotate turnlock fasteners (2) 1/4 turn
counterclockwise and open door (3).
Figure 3-16. Pneumatic Control Panel