Stencil top center of both skid tubes, top of
letters facing inboard, 3 in. aft of step by
towing eyebolt, 1/2-in. black letters.
Locate 1/2-in. black letter "H" for engine
fuel deck drain. inbd of drains, top of letter
facing outbd. Two required.
Four places on top of cabin. Top of letters fac-
ing away from walkway area, outbd and
fwd, 1/2 inch black letters.
Walkway area on top of fuselage. 2 in. black
border. Fwd crossline is 1/4 in. aft of anten-
Walkway area on top of fuselage, will be
painted with non-slip material MIL-W-5044,
Type Il. If necessary paint to match existing
On left and right side of work deck to show
location of steps while standing on work
deck, arrow is painted black.
Paint 1/2 in. dot on upper and lower surface
of blade, blade grip and rotating linkage.
Color MIL-C-46168, aircraft white, No.37875.
Paint dots on opposite blade, grip, and
rotating linkage red. Check existing color
code before painting
Stencil top outboard edges of synchronized
elevator, 4 places, 1/2 in black letters.
Locate 1/2-in. black letter "A" for starter
generator oil-drain, aft of drain, top of letter
(Sheet 14 of 17)
Figure 9-30. Exterior Markings, UH-1C and UH-1M