Do not paint element centered on mounting
horn located on each side of boom, stencil
NO PUSH, 1/2 in. black letters on bend of
Paint 1/2 in. white dots on tail rotor blade
grip, pitch Iink and cross head. Paint red
dots on opposite grip, link and cross head.
Check existing color code before painting.
Locate 1/2-in. black letter "B" for oil tank
vent, aft of vent, top of letter facing outbd.
Locate on access door, see detail D for data
PROVISIONS FOR AUX
for drains and vent. 1/2-in. black letters.
Size 1-7/8 in. x 6 in. with 1/2 in. black letters.
FUEL CELL CAVITY
One located on right side aft of drain and
DRAIN and VENT
two on left side outboard of drain. Top of let-
ters are inboard.
Figure 9-30. Exterior Markings, UH-1C and UH-1M
(Sheet 15 of 17)