TM 55-1650-261-40
SECTION I
INTRODUCTION
1. General Information
4. Equipment Records
This technical manual comprises
overhaul
The Army equipment record system and procedures
instructions for Slide Valve Assembly, Part No.
established in TM 38-750 apply to .this equipment. The
HP796100, FSN 1650-776-1958 (see figure 1),
applicable forms as required by TM 38-750 shall be
manufactured by Hydra-Power (Corporation (84685),
used.
New Rochelle, New York. Sections I through IV of this
technical manual contain instructions for this part
number.
5. Description
The slide valve assembly is a two-position, four-way,
6. Leading Particulars
Leading particulars for the slide valve assembly are as
follows:
Operating pressure
3000 psi
Proof pressure
4500 psi
Burst pressure
7500 psi
Current drain
75 amperes at 30 volts and
70F (21C)
Operating voltage
18 to 30 volts
Ambient temperature
65'F t-53'C) to + 160F
(+7 1C)
Weight (actual)
2.25 lb
Figure 1. Slide Valve Assembly, Part No. HP796100.
7. Painting Requirements
a. Mask all ports, nameplates, holes, and electrical
2. Reporting of Improvements
connector.
Direct reporting of errors, omissions, and
b. Paint slide valve assembly in accordance with
recommendations for improving this manual by the
individual user is encouraged. Reports should be
submitted on DA Form 2028 (Recommended Changes
to DA Publications) and forwarded directly to
8. Preservation, Packaging, Packing, and Marking
Commanding General, U.S. Army Aviation Materiel
Requirements
Command, Attn.: AMSAV-M. P. O. Box 209, St. Louis,
Preserve, package, pack, and mark slide valve
Missouri 63166.
assembly in accordance with instructions contained
3. Purpose
The slide valve assembly is used to control
speed brake systems on aircraft.
Table 1. Painting Requirements
Paint Type
Method of
No. of
Item Name
and Specification
Application
Coats
Notes
Slide Valve
Lacquer, Acrylic-
Spray
2
Paint
Assembly
Nitrocellulose,
outside
MIL-L-19538
surface
Color Black 37038
only.
U.S. GOVERNMENT PRINTING OFFICE: 1986 652-126/20203
PIN: 022209-007
Change 7 2