2-4.1 Bleed Valve Cleaning to Restore Lost Compressor Performance - Continued
Prolonged contact with
lubricating oil (item 5, Appendix
D) may cause a skin rash. Those
areas of skin and clothing that
come in contact with lubricating
oil should be thoroughly washed
immediately. Enclosed areas
where lubricating oil is used
should be adequately ventilated
to keep mist and fumes to a
Lubricating Oil (item 5, Appendix D)
k. Lubricate the O-ring
and install it with the
elbow on the bleed valve.
Do not tighten the elbow
iam nut at this time.
Failure to properly install, align
and torque fuel, oil and air
fittings and tubes could result in
an engine failure.
1. Position the elbow as
required and install air
sensing line. Tighten the
coupling nut to 80-120 in.
lbs. T i g h t e n the jam nut to
55-80 in. lbs.