6-12. Gas Producer Fuel Control - Start Derichment Adjustment - Continued
During attempted start,
must be closely monitored to
prevent overtemperature opera-
tion. Record overtemperature in
the Engine Log.
Turn clockwise to enrich the starting
fuel flow to improve stagnated starts,
cold weather starts, or high altitude
ground starts. Turn counterclockwise
for-a leaner fuel flow when starts are too
hot. Make the adjustment in 10-degree
maximum increments (dots are 10
degrees apart) and tighten locknut 20-
25 lb in. (2.3 -2.8 N.m) after each setting.
Check the starting peak TOT after each
setting until satisfactory starts are
Remove lockwire secur-
ing adjustment locknut
to Pc filter fitting.
L o o s e n a d j u s t m e n
an Allen wrench.