SECTION VIII GENERAL MAINTENANCE PROCEDURES (Continued)
INSTALLATION/REMOVAL OF ENGINE OR
POWER SECTION IN/FROM STANDS
Remove engine from Stand (T. 51) (3) as follows:
Attach Sling (T. 43) and hoist (1) to engine
lifting points (16). Raise hoist enough to support engine
Remove two screws and washers (15) from
each of the 3 and 9 o'clock positions on mount ring (6).
Lift engine clear of stand (3).
Remove 16 bolts (10) and three nuts (8) and
bolts (7) and remove split mount ring (6) from around
Remove 12 bolts (5) and three engine
mount brackets (4) from gas generator case.
GO TO NEXT PAGE