Section IX PREPARATION FOR STORAGE AND SHIPMENT (Continued)
1-89 PRESERVATION (Cont)
21. If engine is to be installed in
a shipping container: (Cont)
Remove cover plates from accessory drives not
in use. Spray exposed surfaces and gearshafts with
Preservation Oil (E.34). Replace cover plates and
torque nuts to 65 to 85 inch-pounds.
Install shipping plugs (14), caps ( 15), covers
(16), bolts (17) and washers (18).
Refer to TM55-2840-251-23P for part
GO TO THE NEXT PAGE