FUEL PUMP FILTER ELEMENT (Continued)
Lubricating Oil (E.2) or (E.71) and install in element
Extreme care must be observed to avoid
damage to element at installation.
Remove protective cap and install filter element (2)
into fuel pump housing. Torque capnut (1) to 75 to 100
inch-pounds and lockwire (E.5).
Remove protective cap from fuel inlet hose (4) and
connect to elbow (5). Torque connection to 450 to 500
inch-pounds and lockwire (E.5) to elbow locknut.
FOLLOW ON MAINTENANCE:
END OF TASK