FUEL ADAPTER AND NOZZLE ASSEMBLY (AVIM) (Continued)
6-6-5 TESTING (Cont)
To eliminate danger of electrostatic
discharge, cable must be grounded.
This test is accomplished with sheath
a. Partially fill container (14) of Test Rig (T.37) (15)
with clean Engine Fuel (E.19). Ground test rig with
b. On inlet manifold assembly only, install Plug
(T.18) (17) in fuel inlet port.
c. Carefully insert blanking tube (18) and connecting
tube (19), (parts of Fixture (T.12)), in fuel manifold
adapter (20) and connect hose assembly (21) to
connecting tube (19). Tighten coupling nut securely.
d. Locate fuel manifold adapter on Fixture (T.12)
(22), secure with two bolts (23) and nuts (24). On inlet
manifold adapter (25), bolt (26) is required in lieu of one
e. Position suitable drip tray below fixture.
GO TO NEXT PAGE