TM 55-2840-251-23
7-4 IGNITION CABLES (Continued)
7-4-1 REMOVAL
1.
Remove nuts (1), bolts (2), nuts (3), bolts (4), nut (5),
bolt (6), nut (7) and bolt (8).
2.
Remove lockwire and disconnect cable (9)
connectors from regulator cover (10) and glow plugs (11).
3.
Remove clamps and cables (9).
7-4-2 INSPECTION
1.
Inspect cables for frayed or broken braiding, which
shall be cause for rejection.
2.
Inspect cables for damaged threads which may be
cleaned up, otherwise reject cable.
7-4-3 TESTING
1.
Insure insulation resistance is not less than 10
megohms at 100 volts, otherwise reject cable.
2.
Check conductors for continuity - resistance shall not
exceed 0.025 ohms.
GO TO NEXT PAGE
7-16