7-5 THERMOCOUPLE HARNESS (AVIM) (Continued)
7-5-4 REPAIR (Cont)
Crimp small ear of lug around wire using Pliers (T.17)
so that 1/16 inch wire exposed.
TIG weld wire to lug using Rod (E.69).
Test weld by gently pulling on lug.
Clean both sides of lug using Crocus Cloth (E.64).
Crimp large ear of lug over tubing using Pliers (T.17)
as shown in steps 1 through 4.
Check insulation value of lug from braiding.
Check that there is no electrical continuity between
the lug and braiding.
GO TO NEXT PAGE