TM 55-2840-251-23
8-1 OIL FILTER ELEMENT (Continued)
8-1-4 INSTALLATION
1.
If metal filter element is installed, lubricate (E.2) or
(E.71) new preformed packing (7) and install in inner end
of element.
2.
Lubricate (E.2) or (E.71) and install new preformed
packing (6) on outer end of element.
3.
Insert element, perforated end leading, into filter body
in compressor inlet case.
4.
Lubricate (E.2) or (E.71) and install new preformed
packing (4) on filter cover (3).
5.
Install filter cover on compressor inlet case mounting
pad studs and secure with four plain washers (2) and self-
locking nuts (1). Torque nuts to 32 to 36 inch-pounds.
NOTE
When installing cover, insure preformed packing
is not trapped or damaged
6.
Inspect.
FOLLOW ON MAINTENANCE:,
None
END OF TASK
8-5/(8-6 blank)