PROPELLER GEARBOX (Continued)
Remove nuts (1) from studs on propeller gearbox
rear housing (2) and remove power turbine shaft
housing (3). Discard packings (4), (5) and (6).
Inspect all studs for bending or damaged threads,
which shall be cause for replacement (Task 9-1-3).
Inspect mounting faces for minor burrs or nicks,
which may be dressed out (Task 9-1-3).
Inspect gearbox front case and rear housing for
corrosion, which shall be removed (Task 9-1-3).
Inspect paint work for defects, which shall be
repaired (Task 9-1-3).
GO TO NEXT PAGE