TM55-2840-251-23
10-3 PROPELLER REVERSING GEAR (Continued)
10-3-1 REMOVAL
1.
Remove and discard cotterpins (1).
2.
Remove nuts (2), washers (3), bolts (4) and rod
assembly (5).
3.
Measure and record distance between bolt hole
centers of rod assembly (5). Remove Lockwire, loosen
locknuts (6) and remove rod ends (7).
4.
Remove and discard cotterpins (8).
5.
Remove nuts (9), washers (10), bolt (11) and rod
assembly (12).
6.
Measure and record distance between bolt hole
centers of rod. Remove lockwire, loosen locknuts (13)
and remove rod ends (14).
GO TO NEXT PAGE
10-8