TM55-2840-251-23
10-3 PROPELLER REVERSING GEAR (Continued)
10-3-1 REMOVAL (Cont)
43.
Remove lockwire, loosen locknut (94) and remove
clevis (95).
44.
Withdraw terminal (96) and wire rope (97).
45.
Remove lockwire, nut (98) and washer (99).
46.
Separate terminal (96) and wire rope (97) by
unscrewing wire rope out of internal left-hand thread in
clamp (100).
47.
Remove clamp (100).
48.
Remove casing (101).
49.
Remove lockwire, nut (102), washer (103) and
swivel (104).
50.
Remove nuts (105), bolts (106) and casing (107).
51.
Remove lockwire, nut (108), washers (109) and
bushing (110).
52.
Remove lockwire, nut (111) and swivel (112).
10-3-2 INSPECTION
Inspect all parts for damage, wear or corrosion,
which shall be cause for rejection.
GO TO NEXT PAGE
10-14