TM 55-2840-254-23
2-16 INSPECT ANTI-ICING AIR GALLERY COVER
2-16
INITIAL SETUP
Materials:
None
Applicable Configurations:
All
Personnel Required:
68B30 Aircraft Powerplant Inspector
Tools:
Technical Inspection Tool Kit,
Equipment Condition:
NSN 5180-00-323-5114
Off Engine Task
1.
Inspect anti-icing air gallery cover upper half (1).
a. There shall be no cracks or corrosion.
b. There shall be no gouges or chafes deeper
than 0.030 inch in cover (2). Any length or
width gouge or chafe is acceptable.
c. There shall be no gouges or chafes deeper
than 0.015 inch in tubes (3). Any length or
width gouge or chafe is acceptable.
d. There shall be no two gouges or chafes closer
to each other than 1 -inch.
GO TO NEXT PAGE
2-58