2-35 INSTALL COMPRESSOR ROTOR BLADES (Continued)
q. Engage Iockpin by installing blade (23) rear-
ward completely into disc slot. Use rawhide
mallet and installation tool and rod contained
in kit (T31) (24).
Check engagement of Iockpin
bent piece of Iockwire (16) used in previous
step 1. Insert Iockwire (16) into slot in base of
blade (23) with tweezers (18). Bend of wire
shall protrude 1/16 inch from end of blade
(23) when wire is bottomed on Iockpin.
GO TO NEXT PAGE