2-46 ASSEMBLE NO. 2 BEARING PACKAGE (AVIM) (Continued)
d. Subtract 0.003 from Dimension C. Record as
Dimension C1. Subtract 0.006 from Dimen-
sion C. Record as Dimension C2.
Using micrometer measure the thickness of
Select shims so total thickness is no less than
Dimension C2 and no more than C1 in step d.
5. Apply shortening compound (E46) to surface
(13) on housing assembly (7) and to bearing
outer race (10).
6. Align pin (14) in outer race (10) with slot (15)
in housing assembly (7). Press outer race (10)
into housing assembly (7).
GO TO NEXT PAGE