2-51 REPAIR OUTPUT SHAFT SEAL AND HOUSING ASSEMBLY (Continued)
d. Clean housing (5) as follows:
Dry cleaning solvent (E17) is flammable
and toxic. It can irritate skin and cause
burns. Use only in well-ventilated area,
away from heat and open flame. In case
of contact, immediately flush skin or
eyes with water for at least 15 minutes.
Get medical attention for eyes.
(1) Wear gloves (E20). Immerse and agitate
in dry cleaning solvent (E17). Use brush
in seven grooves (9).
(2) Wipe dry using clean dry lint-free cloth
When using compressed air for cleaning,
use approved protective equipment for
eyes and face. Do not use more than
30 psig air pressure. Do not direct air
toward yourself or another person. Fail-
ure to comply could result in injury to
eyes or skin. In case of injury, get medi-
(3) Wear goggles. Blow dry seven grooves
(9) and 16 air-bleed holes (10).
GO TO NEXT PAGE