2-4 INSPECT INTERSTAGE AIR-BLEED ACTUATOR (Continued)
3. Inspect interstage air-bleed actuator as
a. Inspect bracket (3).
(1) There shall be no more than one crack in
the gusset support area (4) of the upper-
most holes less than 0.500 inch in length
that is acceptable without stop drilling.
one crack that exceeds 0.500 inch in
length is allowed providing it is stop drill
(2) There shall be no sharp corners or protru-
sions which resu t from tears or gouges.
(3) There shall be no bending.
b. Inspect housing (5) and cover (6). There
shall be no cracks.
END OF TASK