4-40 INSTALL NO. 4 AND 5 BEARING PACKAGE SEALS (AVIM) (Continued)
b. Place fourth stage power turbine rotor (59)
with hub on locating bar (T1) (60). Measure
from aft face of hub (61) to locating bar (T1)
(60). Record as Dimension B.
c. If ring spacer (62) was not removed, subtract
Dimension B from Dimension A. The answer
is how much of shaft should protrude from
fourth stage power turbine rotor. Record for
If ring spacer was not removed, go to
d. If ring spacer (62) was removed (Ref. Task
4-33), measure thickness of it. Record as Di-
e. Add Dimension C to Dimension B. Record
answer as Dimension D.
f. Subtract Dimension D from Dimension A.
The answer is how much of shaft should pro-
trude from fourth stage power turbine rotor.
Record answer for later use.
GO TO NEXT PAGE