TM 55-2840-254-23
5-3 CLEAN ACCESSORY GEARBOX ASSEMBLY (Continued)
5-3
4. Clean oil filter cap and stem assembly (10) as
follows:
a. Immerse and agitate cap and stem assembly
(10) in dry cleaning solvent (E17). Use brush
on outside surfaces.
b. Wipe outside surfaces dry with clean lint-free
cloth (E26).
When using compressed air for cleaning,
use approved protective equipment for
eyes and face. Do not use more than 30
psig air pressure. Do not direct air toward
yourself or another person. Failure to
comply could result in injury to eyes
or skin. In case of injury, get medical
attention.
c. Wear goggles. Blow dry internal passages (11)
using clean, dry compressed air.
FOLLOW-ON MAINTENANCE:
Inspect Accessory Gearbox Assembly
(Task 5-4).
END OF TASK
5-21