TM 55-2840-254-23
5-11 INSTALL ACCESSORY GEAR ASSEMBLY (AVIM) (Continued)
5-11
e. Using helper, install torque multiplier (T63)
(20) over wrench (14).
Make sure handle is fully seated and
ratchet selector on torque multiplier is
properly set before applying torque.
Rotating ratchet selector with load on
torque pack can damage unit and injure
personnel.
Do not change ratchet selector when
torque load is on torque multiplier.
Damage to equipment or injury to
personnel can result.
f. Install handle (21), detail of torque multiplier
(T63) (20), into slot (22).
g. Turn handle (21) counterclockwise to loosen
nut.
GO TO NEXT PAGE
5-64