NAVAIR 01-1A-505-2
010 03
TO 00-25-255-1
Page 13
TM 1-1500-323-24-2
22. CONDUIT FITTINGS. Conduit fittings are used to
prevent coupling device from damage. See WP 006 04
connect a conduit to a connector and may be either a
for detailed information on dust cap M90376. For
ferrule, nut, adapter, box fitting, 45 elbow, 90 elbow,
information on dust caps: MS3182, see Figure 13 and
hex nut, or seal assembly .See WP 007 03 for detailed
for MS3183, see Figure 14, this WP.
information on the conduit fittings: AN3050, AN3051,
AN3052, AN3053, AN3054, AN3055, AN3056, AN3058,
26. MOUNTING PLATES FOR FLANGE MOUNT
AN3064, AN3060, AN3061, AN3062, AN3063, AN3068,
and AN3067.
flange mount receptacle to mounting structure. See
WP 008 03 for detailed information on mounting plates:
23. MOUNTING NUT FOR JAM NUT RECEPTACLES.
M85049/95 and M85049/96.
Part number MS3186 mounting nut is used to
mechanically mount a receptacle to a structure. See
27. RUBBER BUSHINGS. Part number MS3420
Figure 11 for information on mount nut AN3066.
bushings standard material and color is black neoprene.
The primary use is to provide a cushion for wires at
connector to aid strain relief. See WP 008 03 for detailed
provided and shall be used to stow unmated plugs,
information on rubber bushing: MS3420-6 and
caps, or protective covers when related component is
MS3420-16.
not in operational use. The dummy receptacle shall be
marked and located to permit easy access. See Figure 12,
28. SEALING PLUGS. Part number M83723/28 and
this WP, for detailed information on dummy receptacle
part number MS27488 plugs are inserted, large end
MS3135.
first, to fill a cavity in a connector insert. Its function is
to seal all unoccupied apertures in the insert, especially
25. DUST CAPS. Protective covers are more commonly
in environmental connectors. See detailed information
called dust caps. The purpose of dust caps is to prevent
in WP 008 03 on sealing plug MS27488.
dirt from entering connectors, pins, and sockets and to