NAVAIR 01-1A-505-3
TO 1-1A-14-3
TM 1-1500-323-24-3
003 02
1 September 2011
Page 2
Military Designation .............................................................................................................................................. 3
Specification Sheet................................................................................................................................................. 3
Polarization ................................................................................................................................................................... 3
Record of Applicable Technical Directives
None
Support Equipment Required
(4)
M - Nonmagnetic for space borne
Part No./
missions
Type Designation
Nomenclature
M22520/2-01
Tool, Crimp Frame
(5)
D - General purpose for space borne
M22520/2-06
Positioner
missions where high reliability is required.
M22520/2-08
Positioner
M22520/2-09
Positioner
(6) K - Hermetic for space borne missions where
M22520/3-1
Gage, Inspection
high reliability is required.
M81969/14-01
Tool, Insertion and
Removal
b. Termination Style. These connectors
are
M81969/14-02
Tool, Insertion and
classified by the following termination types:
Removal
(1) Crimp contacts.
Materials Required
(2) Solder contacts.
Specification/
Part No.
Nomenclature
TT-I-735
Alcohol, Isopropyl
(3) Insulation displacement contacts (IDC).
H-B-643 (or equivalent)
Brush, Acid Swabbing
MIL-F-14256 (or equivalent)
Flux, Liquid
(4) Printed wiring board (PWB).
SnGOWRMAP3
Solder
(or equivalent)
c. Types. These connectors are classified by the
following types:
1.
INTRODUCTION.
(1) I - Standard density (size 20 contacts).
2. This Work Package (WP) covers non-
environmental, polarized shell, miniature, rack and panel
(2) II - High density (size 22D contacts).
connectors, both military and commercial, having pin
and socket, crimp removable, solder non-removable, or
insulation displacement non-removable contacts with
(3) III - Standard density (size 20 IDC contacts).
rigid or float mounting, designed for -67F (-55C) to
257F (+125C) operating temperature.
3. DESCRIPTION. The connectors covered by MIL-
DTL-24308 are classified according to the following:
This document includes cadmium as a plating
material. The use of cadmium has been restricted
a. Classes. There are six classes
for
these
and/or banned for use in many countries due to
connectors and are classified as follows:
environmental and health concerns. Consult
applicable health and environmental regulations
(1)
G - General purpose
regarding its use, handling and disposition.
(2)
N Nonmagnetic
(3)
H Hermetic
