NAVAIR 01-1A-505-3
TO 1-1A-14-3
TM 1-1500-323-24-3
010 02
1 September 2011
Page 5
23. INTERCHANGEABILITY. All connectors
16. INSERTS. Inserts are molded or bonded one-
having the same military part number shall be
piece construction. Connectors and accessories are
completely interchangeable with respect to
designed and constructed to withstand normal
installation and performance.
handling incidental to installation and maintenance.
17. Crimp Snap-In. Contacts Snap-in contacts
24. INSERT ARRANGEMENT. The insert
designed to SAE AS39029 can be crimped with
arrangement is the number and size of contacts
standard M22520 crimp tool.
available by shell size (Table 2).
18. Closed-Entry Socket Contacts. These contacts
25. INSERT CONFIGURATION. The insert
eliminate damage from abuse by test probes and help
configuration is the manner in which the contacts are
to correct any misaligned pins during engagement.
placed within the connector insert. All arrangements
identified in Table 2 are illustrated (Figure 3).
19. Contact Insertion. Insertion is accomplished from
rear of connector. When contact is fully inserted, the
26. CONTACTS. Contacts are designed to prevent
clip tines snap securely behind contact shoulders.
damage to contact retention device or sealing member
during insertion or removal of contacts.
20. Contact Extraction. Extraction is accomplished
27. Fixed Contacts. Contacts in hermetically sealed
with use of a removal tool.
or thru-bulkhead receptacles are fixed non-removable
21. Contact Retaining Clip. The contact retaining
and solder-able.
clip is completely encased in a tough plastic wafer to
28. Crimp Removable Contacts. Crimp removable
protect clip from damage.
contacts may be used with all environment resisting
22. Peripheral Seal. The pin insert has a dynamic
classes of connectors.
peripheral seal which contacts the mating connector
29. Contact Availability. Crimp contacts are supplied
shell before mating is completed. The socket insert,
with each connector unit package. There are contacts
which is resilient, has a integral-molded static
to complete the insert arrangement and have at least
peripheral seal which contacts the mating connector
two spares.
insert before insert faces make contact.
