TM 1-4920-433-13&P
0025 00
20A CIRCUIT BREAKER (HOSE ASSEMBLY MACHINE)
WARNING
All power to shelter must be turned OFF before proceeding with any electrical
tests or repairs.
CAUTION
This work should be performed by a qualified electrician.
Inspect
Visually inspect 20A circuit breaker for any visible damage.
Remove
1. Tag and disconnect shelter electrical power.
2. Set all circuit breaker switches to OFF position.
NOTE
This procedure covers obsolete NQOB circuit breaker panel and new NQOD
circuit breaker panel. These units are distinguishable by nameplates attached to
panel boards.
3. To remove panel cover and board:
a. NQOD - Remove four screws and washers and lift circuit breaker panel cover from panel board.
b. NQOB - Move clamp fingers to OPEN position and lift circuit breaker panel cover from panel board.
c.
Remove four screws and washers and lift panel board from circuit breaker box.
NOTE
Once panel boards are removed, all further procedures are identical for both
models.
4. Move main circuit breaker to the ON position.
0025 00-2
