TM 1-4920-435-13&P
0025 00
SHEET METAL SHOP
BAND SAW BRACKET
INITIAL SETUP
Tools And Special Tools:
References:
Tool Kit, Power Plant
Torque Wrench 0-600 in. lbs. (5120-01-530-2311)
Equipment Conditions:
Functional
Materials/Parts:
Band Saw Bracket
Hexagon Head Cap Screw
Lock Washer (WP 0033 00, Figure 13, Item 3)
Flat Washer (WP 0033 00, Figure 13, Item 4)
Plain Hex Nut (WP 0033 00, Figure 13, Item 5)
Personnel Required: (1)
CMF 15 Series
44E, Machinist
NOTE
During installation of components the same hardware should be used so as to
maintain the original integrity of the shop sets.
INSPECT
Inspect band saw brackets for loose bolts. If there are any damaged bolts or threaded inserts, replace as
instructed in WP 0026 00. Visually inspect band saw brackets for any damage that will render them ineffective. If
a bracket is damaged and is not able to mount band saw to floor as designed, it must be replaced. Replace
damaged brackets by manufacturing a new one from drawing located in WP 0027 00.
0025 00-22
