TM 1-4920-449-13&P
3-13. Water/Oil Separator Fittings and Air Hose - Replace (Cont)
REPLACE AIR HOSE
1. Remove both loop clamps (1) from defective
hose (2).
2. Slit
end
hose (2) lengthwise from protective cap (3) to
of fitting(4) (approximately 1 1/2 inches) with
knife
3. Bend hose(2) back over fitting(4) and snap off with
quick tug.
4. Repeat Steps 2 and 3 at other end of hose.
3-13
GO TO NEXT PAGE
3-14
