TM 1-4920-449-13&P
Application/Explanation
Code
D
Z
B
Depot is the lowest category that can do complete repair of the item.
Nonreparable. No repair is authorized.
No repair is authorized. (No parts or special tools are authorized for
the maintenance of a “B” - coded item.) However, the item may be
requisitioned by adjusting, lubricating, etc., at the user level.
(3) Recoverability Code. Recoverability codes are assigned to items to indicate the disposition action on un-
serviceable items. The recoverability code is entered in the fifth position of the SMR Code as follows:
Recoverability Codes
Definition
z
Nonreparable item. When unserviceable, condemn and dispose of
the item at the category of maintenance shown in 3rd position of
SMR Code.
O
Reparable item. When uneconomically reparable, condemn and dis-
pose of the item at organizational or aviation unit category.
F
Reparable item. When uneconomically reparable, condemn and dis-
pose of the item at the direct support or aviation intermediate
category.
H
D
L
A
Reparable item. When uneconomically reparable, condemn and dis-
pose of the item at the general support category.
Reparable item. When beyond lower category repair capability,
return to depot. Condemnation and disposal of item is not
authorized below depot category.
Reparable item. Condemnation and disposal not authorized below
specialized repair activity.
Item requires special handling or condemnation procedures because
of specific reasons (i.e., precious metal content, high dollar value,
critical material, or hazardous material). Refer to appropriate
manuals/directives for specific instructions.
c. COLUMN 3 NATIONAL STOCK NUMBER
Column 3 lists the National stock number (NSN) assigned to the
item. Use the NSN for request/requisitions.
d. Column 4 CAGEC Column 4, the Contractors and Government Entity Code (CAGEC) is a 5-digit numeric
code which is used to identify the manufacturer, distribute, or Government agency, etc., that supplies the item.
e. Column 5 PART NUMBER Column 5 indicates the primary number used by the manufacturer (individual,
company, firm, corporation, or Government activity), which controls the design and characteristics of the item by
means of its engineering drawings, specifications standards, and inspection requirements to identify an item or
range of items.
D-4
