TM 1-4920-454-13&P
3-16. Fixtures - Alr Feed Thru Connector - Inspect
3-16
This tasks covers: Inspection of connector
INITIAL SETUP
68B Aircraft Powerplant Repairer
INSPECT AIR FEED THRU CONNECTOR
1. Remove dust cap (1) or quick disconnect (2) from
connector (3) at exterior service panel.
2.
Inspect condition of connector threads (4). Inspect
connector weld (5) for cracks
JAW Task 3-17, if defective.
or breaks. Replace
3. Install quick disconnect(2) as necessary.
4. Ensure dust cap(1) is installed when quick discon-
nect is not connected.
END OF TASK
3-19
