TM 1-7010-386-12&P
REPAIR PARTS AND SPECIAL TOOLS LIST
(RPSTL) INTRODUCTION
0012 00
EXPLANATION OF COLUMNS IN THE REPAIR PARTS LIST AND SPECIAL TOOLS LIST WORK
PACKAGES (Continued)
Source Code
Application/Explanation
XA
Do not requisition an "XA" coded item. Order the next higher assembly. (Refer
To NOTE below.)
If an item is not available from salvage, order it using the CAGEC and P/N.
XB
Installation drawings, diagrams, instruction sheets, field service drawings;
XC
Identified by manufacturer's P/N.
Item is not stocked. Order an XD-coded item through normal supply channels
XD
Using the CAGEC and P/N given, if no NSN is available.
NOTE
Cannibalization or controlled exchange, when authorized, may be
used as a source of supply for items with the above source codes
except for those items source coded "XA" or those aircraft support
items source restricted by requirements of AR 750-1.
Maintenance Code.
Maintenance codes tell you the level(s) of maintenance authorized to use and repair support items.
The maintenance codes are entered in the third and fourth position of the SMR code as follows:
Third Position.
The maintenance code entered in the third position tells you the lowest maintenance level authorized
to remove, replace, and use an item. The maintenance code entered in the third position will indicate
authorization to the following levels of maintenance:
Maintenance
Application/Explanation
Code
C
Crew or operator maintenance done within unit/AVUM
Maintenance.
O
Unit level/AVUM maintenance can remove, replace, and
use the item.
F
Direct support/AVUM maintenance can remove, replace,
and use the item.
H
General support maintenance can remove, replace, and
use the item.
L
Specialized repair activity can remove, replace, and use
the item.
D
Depot can remove, replace and use the item.
0012 00-3
