TM 10-4930-351-14
0007 00
SYSTEM ASSEMBLY AND PREPARATION FOR USE (Continued)
4
6
7
3
8
2
1
5
Figure 3. API Specific Gravity Determination
5.
Inspect AAFARS for damage that may have occurred during transport and ensure all system components are accounted
for.
6.
Unlatch and open all AAFARS bags and containers.
WARNING
Serious injury could occur if heavy equipment is moved/lifted without sufficient personnel to do the
job. The engine module should be removed from the pump-engine module for moving or lifting. If
the pump-engine module must be moved as a unit, do not lift the module two feet with less than five
personnel, three feet with less than six personnel, or five feet with less than eight personnel.
7.
Remove engine module from pump-engine module. (Refer to figure 4.)
a.
Unclamp exhaust pipe (1) from exhaust manifold (2).
b.
Disconnect pumpage over temperature cable at engine module connection panel J3 (3). Install dust caps on
connectors. Wrap free end of cable around fuel transfer pump outlet (5).
c.
Disconnect fuel supply line (6) and fuel return line (7) at engine module. Connect free ends of lines together.
d.
Disengage latches (8) to unlatch engine module (9) from pump-engine frame (10) and slide engine module out of
frame.
0007 00-6