TM 10-4930-351-14
0058 00
3
2
9
5
4
8
7
1
6
INSTALLATION
1.
Wipe clean the gasket surface.
2.
Insert and hold mounting screws (6), lock washers (7) and flat washers (8) in sight gauge (4) body. Position gasket (9)
over screws (6). With sight gauge (4) body in a horizontal position, place float ball (5) in groove. Install as an assembly,
bottom first to prevent ball (5) falling out. Tighten mounting screws (6) finger tight.
3.
Torque the mounting screws (6) evenly to 45 in lbs.
4.
Close the manual vent valve (2).
5.
Remove blocks from beneath liquid fuel filter separator.
6.
Replace grounding cable (1) in stowage location.
END OF WORK PACKAGE
0058 00-2