TM 10-4930-351-24P
0001 00
FIG. Column. This column lists the number of the figure where the item is identified/located. The figures are in numerical
order in the repair parts list and special tools list work packages.
ITEM Column. The item number identifies the item associated with the figure listed in the adjacent FIG. column. This item is
also identified by the NSN listed on the same line.
2. Part Number (P/N) Index Work Package. P/Ns in this index are listed in ascending alphanumeric sequence (vertical
arrangement of letter and number combinations which place the first letter or digit of each group in order A through Z,
followed by the numbers 0 through 9 and each following letter or digit in like order).
PART NUMBER Column. Indicates the P/N assigned to the item.
FIG. Column. This column lists the number of the figure where the item is identified/located in the repair parts list and
special tools list work packages
ITEM Column. The item number is the number assigned to the item as it appears in the figure referenced in the adjacent
figure number column.
SPECIAL INFORMATION
UOC. The UOC appears in the lower left corner of the Description Column heading. Usable on codes are shown as "UOC .."
in the Description Column (justified left) on the first line under the applicable item/nomenclature. Uncoded items are
applicable to all models.
Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material functional group of this
RPSTL. Part numbers for bulk materials are also referenced in the Description Column of the line item entry for the item to
be manufactured/fabricated. Detailed fabrication instructions for items source coded to be manufactured or fabricated are
found in TM 10-4930-351-14.
Index Numbers. Items which have the word BULK in the figure column will have an index number shown in the item
number column. This index number is a cross-reference between the NSN/PN index work packages and the bulk material list
in the repair parts list work package.
Associated Publications. The publication listed below pertains to the AAFARS.
Publication
Short Title
TM 10-4930-351-14
Operator, Unit, Direct Support and General Support Maintenance Manual
HOW TO LOCATE REPAIR PARTS.
1. When NSNs or P/Ns Are Not Known.
First. Using the table of contents, determine the assembly group to which the item belongs. This is necessary since figures
are prepared for assembly groups and subassembly groups, and lists are divided into the same groups.
Second. Find the figure covering the functional group or the subfunctional group to which the item belongs.
Third. Identify the item on the figure and note the number(s).
Fourth. Look in the repair parts list work packages for the figure and item numbers. The NSNs and part numbers are on the
same line as the associated item numbers.
0001 00-5
