TM55-1500-345-23
CODE
DIRECTIONS
WORDING
I
NO.
15
Locate decal on end of instrument pedestal,
HIGH VOLTAGE
1/2-in. aircraft white letters.
16
Stencil both crew doors as shown, 1-in. air-
craft white letters and arrow. Arrow points
to Jettison handle only.
Paint jettison handles alternate orange-
17
yellow and black stripes, both sides refer to
18
NOTE: Seat must be in full down position to
THE WORD NOTE WILL BE IN 1 INCH OLIVE
remove and install in Acft seat weight
DRAB, NO. 34087, LETTERS. ALL OTHER
LETTERING WILL BE 1/2 INCH OLIVE
LBs pull handles to tilt seat back.
DRAB, NO. 34087, LETTERS
19
Cargo Release Pedal, located between the
pilot's anti-torque pedals.
1. Paint cargo release pedal black,
MIL-C-46168, TY2, No. 37038.
2. Paint cargo release pedal raised
letters "PUSH" White, MIL-C-46168,
TY2, No. 37875.
(Sheet 4 of 4)
Figure 9-29. Interior Markings, UH-1C and UH-1M
9-133
Change 4
