TM 55-1510-215-CL
24.
Autopilot switch (AP) (autopilot mode control panel) - ON.
25.
PITCH TEST switch (control pedestal) - Hold to DN position
for approximately two seconds. Autopilot should disconnect
and the aural alert should sound.
26.
Autopilot switch (AP) (autopilot mod e control panel) - ON.
27.
Vertical trim control (autopilot mode control panel) - Move to
insert a pitch-up command.
28.
Control wheel - Hold to keep from moving and observe that
the trim wheel moves in the nose up direction after a three
second delay.
29.
Control wheel steering switch (CWS) (control wheel) -
Depress momentarily.
30.
Vertical trim control (autopilot mode control panel) - Move to
insert a pitch-down command.
31.
Control wheel - Hold to keep from moving and observe that
the trim wheel moves in the nose down direction after a
three second delay.
32.
Control wheel steering switch (CWS) (control wheel) -
Depress and center the control wheel about the roll axis,
then release.
33.
Heading switch (HDG) (autopilot mode control panel) - Press
on.
34.
Heading select bug (horizontal situation indicator) - Set bug
to command a right turn. The control wheel should rotate
clockwise.
P-2C C 2