TM-55-2840-241-23 Engine Assembly Gas Turbine Model GTCP36-150 (BH) Manual

CHAPTER 1 INTRODUCTION - TM-55-2840-241-23_37
Section   Il.   DESCRIPTION
DESCRIPTION - TM-55-2840-241-23_39
DESCRIPTION - TM-55-2840-241-23_40
DESCRIPTION - TM-55-2840-241-23_42
DESCRIPTION - TM-55-2840-241-23_43
DESCRIPTION - TM-55-2840-241-23_44
DESCRIPTION - TM-55-2840-241-23_46
Table 1-1. Leading Particulars
CHAPTER 2 SPECIAL TOOLS, TEST EQUIPMENT, AND CONSUMABLE MATERIALS
Section II. CONSUMABLE MATERIALS
Table 2-2. CONSUMABLE MATERIALS (CONT.)
CONSUMABLE MATERIALS (CONT.)
CHAPTER 3 PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING
PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING - TM-55-2840-241-23_56
PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING - TM-55-2840-241-23_57
PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING - TM-55-2840-241-23_60
PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING - TM-55-2840-241-23_61
PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING - TM-55-2840-241-23_62
PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING - TM-55-2840-241-23_63
PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING - TM-55-2840-241-23_64
PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING - TM-55-2840-241-23_66
PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING - TM-55-2840-241-23_67
PREPARATION FOR SERVICE, STORAGE, AND ENGINE HANDLING - TM-55-2840-241-23_68
Section  II.   ENGINE HANDLING
ENGINE HANDLING
CHAPTER 4 TROUBLESHOOTING
Table   4-1.   Troubleshooting   (Continued)
Troubleshooting   (Continued) - TM-55-2840-241-23_74
Troubleshooting   (Continued) - TM-55-2840-241-23_75
Troubleshooting   (Continued) - TM-55-2840-241-23_76
Troubleshooting   (Continued) - TM-55-2840-241-23_77
Troubleshooting   (Continued) - TM-55-2840-241-23_78
Troubleshooting   (Continued) - TM-55-2840-241-23_79
Troubleshooting   (Continued) - TM-55-2840-241-23_80
Troubleshooting   (Continued) - TM-55-2840-241-23_81
Troubleshooting   (Continued) - TM-55-2840-241-23_82
Troubleshooting   (Continued) - TM-55-2840-241-23_83
Troubleshooting   (Continued) - TM-55-2840-241-23_84
Troubleshooting   (Continued) - TM-55-2840-241-23_85
Troubleshooting   (Continued) - TM-55-2840-241-23_86
Troubleshooting   (Continued) - TM-55-2840-241-23_87
Troubleshooting   (Continued) - TM-55-2840-241-23_88
Troubleshooting   (Continued) - TM-55-2840-241-23_89
Troubleshooting   (Continued) - TM-55-2840-241-23_91
Power Loss
Health   Cheek   Procedures.
CHAPTER   5 ACCESSORIES    SERVICING
Universal   Fittings.
Rigid Tube Installation.
Section  II.   FUEL SYSTEM
FUEL SYSTEM - TM-55-2840-241-23_102
FUEL SYSTEM - TM-55-2840-241-23_103
FUEL SYSTEM - TM-55-2840-241-23_104
FUEL SYSTEM - TM-55-2840-241-23_105
FUEL SYSTEM - TM-55-2840-241-23_106
FUEL SYSTEM - TM-55-2840-241-23_108
FUEL SYSTEM - TM-55-2840-241-23_109
FUEL SYSTEM - TM-55-2840-241-23_110
FUEL SYSTEM - TM-55-2840-241-23_111
FUEL SYSTEM - TM-55-2840-241-23_112
FUEL SYSTEM - TM-55-2840-241-23_113
Table 5-1.1 Adjustments to Improve Starting
Figure 5-6.2. Start-Derich and Start-Accel (Tweaker)   Adjustments
Figure 5-7. Fuel Control Max Flow Stop Adjustment
Figure 5-8. Fuel Control Fuel Filter
FUEL SYSTEM - TM-55-2840-241-23_118
FUEL SYSTEM - TM-55-2840-241-23_119
FUEL SYSTEM - TM-55-2840-241-23_120
FUEL SYSTEM - TM-55-2840-241-23_121
Table 5-1.2. Torque Umits for Steel Couplings on Steel Fittings
FUEL SYSTEM - TM-55-2840-241-23_123
FUEL SYSTEM - TM-55-2840-241-23_125
FUEL SYSTEM - TM-55-2840-241-23_126
FUEL SYSTEM - TM-55-2840-241-23_127
FUEL SYSTEM - TM-55-2840-241-23_128
FUEL SYSTEM - TM-55-2840-241-23_131
Figure  5-12.  External Oil Check Valve
FUEL SYSTEM - TM-55-2840-241-23_133
Section  IV.   ANTI-ICING AND BLEED AIR SYSTEMS
Table 5-2. Anti-icing Air Valve Inspection and Repair
ANTI-ICING AND BLEED AIR SYSTEMS - TM-55-2840-241-23_137
ANTI-ICING AND BLEED AIR SYSTEMS - TM-55-2840-241-23_138
ANTI-ICING AND BLEED AIR SYSTEMS - TM-55-2840-241-23_139
ANTI-ICING AND BLEED AIR SYSTEMS - TM-55-2840-241-23_140
ANTI-ICING AND BLEED AIR SYSTEMS - TM-55-2840-241-23_141
CHAPTER 6 ENGINE   DISASSEMBLY
Figure   6-1 . Compressor   Case   Assembly
CHAPTER 7 CLEANING,   INSPECTION   AND   REPAIR
CLEANING - TM-55-2840-241-23_145
CLEANING - TM-55-2840-241-23_146
Section II. INSPECTION
INSPECTION - TM-55-2840-241-23_148
INSPECTION - TM-55-2840-241-23_149
INSPECTION - TM-55-2840-241-23_150
INSPECTION - TM-55-2840-241-23_151
INSPECTION - TM-55-2840-241-23_154
INSPECTION - TM-55-2840-241-23_155
INSPECTION - TM-55-2840-241-23_156
INSPECTION - TM-55-2840-241-23_157
INSPECTION - TM-55-2840-241-23_158
INSPECTION - TM-55-2840-241-23_160
Section   Ill.   REPAIR
REPAIR - TM-55-2840-241-23_162
REPAIR - TM-55-2840-241-23_163
REPAIR - TM-55-2840-241-23_164
REPAIR - TM-55-2840-241-23_165
REPAIR - TM-55-2840-241-23_166
REPAIR - TM-55-2840-241-23_168
CHAPTER   8 ASSEMBLY    OF    SUBASSEMBLIES
CHAPTER 9 FINAL ENGINE ASSEMBLY
FINAL ENGINE ASSEMBLY
CHAPTER 10 FINAL ENGINE TEST
FINAL ENGINE TEST - TM-55-2840-241-23_173
FINAL ENGINE TEST - TM-55-2840-241-23_175
FINAL ENGINE TEST - TM-55-2840-241-23_177
FINAL ENGINE TEST - TM-55-2840-241-23_178
FINAL ENGINE TEST - TM-55-2840-241-23_179
FINAL ENGINE TEST - TM-55-2840-241-23_180
Table   10-3.   Functional   Test   Schedule
CHAPTER   11 TORQUES   AND   DIMENSIONAL   LIMITS
Table 11-1. Torque Values
Torque Values (Continued)
Section Il. DIMENSIONAL LIMITS
CHAPTER 12 SPECIAL INSPECTIONS
Table 12-3.  First-Stage Turbine Nozzle and Shield Inspection
Section II. COMPRESSOR
Section III. ABNORMAL FLIGHT MANEUVER INSPECTION
CHAPTER 13 OVERHAUL INTERVAL AND RETIREMENT SCHEDULE
Table   13-1.   Overhaul   and   Retirement   Interval   -   (Cont.)
APPENDIX A REFERENCES - TM-55-2840-241-23_193
A P P E N D I X B MAINTENANCE   ALLOCATION   CHART
INTRODUCTION - TM-55-2840-241-23_195
INTRODUCTION - TM-55-2840-241-23_196
INTRODUCTION - TM-55-2840-241-23_197
INTRODUCTION - TM-55-2840-241-23_198
Section II. MAINTENANCE ALLOCATION CHART
MAINTENANCE ALLOCATION CHART (CONT.) - TM-55-2840-241-23_200
MAINTENANCE ALLOCATION CHART (CONT.) - TM-55-2840-241-23_201
MAINTENANCE ALLOCATION CHART (CONT.) - TM-55-2840-241-23_202
MAINTENANCE ALLOCATION CHART (CONT.) - TM-55-2840-241-23_203
MAINTENANCE ALLOCATION CHART (CONT.) - TM-55-2840-241-23_204
MAINTENANCE ALLOCATION CHART (CONT.) - TM-55-2840-241-23_205
MAINTENANCE ALLOCATION CHART (CONT.) - TM-55-2840-241-23_206
MAINTENANCE ALLOCATION CHART (CONT.) - TM-55-2840-241-23_207
Section III. TOOL AND TEST EQUIPMENT REQUIREMENTS
Section IV. REMARKS

Privacy Statement
Press Release
Contact

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business