TM 55-2840-254-23
2-31 REMOVE COMPRESSOR ROTOR BLADES (Continued)
2-31
Do not remove any parent metal from
inside Iockpin hole. Removing material
will enlarge hole. If this happens, com-
pressor rotor assembly will have to be
replaced.
k. Clean out Iockpin hole (11). Use twist drill
(12). Remove tape.
NOTE
Second and third stage blades are
removed forward. Removal of
third stage blade is shown.
2. Remove third stage compressor blades (13) as
follows:
GO TO NEXT PAGE
2-263
