TM 55-2840-254-23
2-32 CLEAN COMPRESSOR ROTOR BLADES
2-32
INITIAL SETUP
Applicable Configurations:
All
Tools:
None
Materials:
Dry Cleaning Solvent (E17)
Gloves (E20)
Lint-Free Cloth (E26)
Oil Filler Assembly and Oil Filler Strainer
Removed (Task 8-16)
Starter Drive Assembly Removed (Task 5-12)
Main Fuel Filter and Bracket Removed
(Task 6-29)
Interstate Air-Bleed Actuator Removed
(Task 2-1)
Compressor Bleed Band Removed (Task 2-9)
Upper Compressor Housing Removed
(Task 2-19)
General Safety Instructions:
Personnel Required:
68B10 Aircraft Powerplant Repairer
Equipment Condition:
Dry cleaning solvent (E17) is flammable
Engine Oil System Drained (Task 1-75)
and toxic. It can irritate skin and cause
Oil Cooler Assembly Removed (Task 8-5)
burns. Use only in well-ventilated area,
In-Line Fuel Filter Assembly Removed
(Task 6-36)
away from heat and open flame. In case
of contact, immediately flush skin or
Ignition Exciter Removed (Task 7-11)
eyes with water for at least 15 minutes.
Get medical attention for eyes.
GO TO NEXT PAGE
2-278
