TM 55-2840-254-23
2-51 REPAIR OUTPUT SHAFT SEAL AND HOUSING ASSEMBLY (Continued)
2-51
g. Install oil seal as follows:
(1) Position housing (5) on ring (11) of in-
stallation tool (T7) with aft side (12)
seated into recessed I.D. (13).
(2) Position oil seal (4) on housing (5) with
face marked OIL SIDE (14) facing down.
(3) Position sleeve (15) of installation tool
(T7) on oil seal (4) with recessed I.D.
(16) facing down.
GO TO NEXT PAGE
2-442
