TM 55–2840–254–23
Change 7 2–465
Section XI. OUTPUT SHAFT SUPPORT HOUSING – MAINTENANCE PROCEDURES
2–58 REMOVE OUTPUT SHAFT SUPPORT HOUSING
2–58
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powerplant Mechanics Tool Kit,
NSN 5180–00–323–4944
Handling Tool (T18) (3)
Aircraft Group Cover (T29)
Materials/Parts:
Wiping rag (E58)
Personnel Required:
68B10 Aircraft Powerplant Repairer
Equipment Condition:
Engine Oil System Drained (Task 1–75)
Output Shaft Seal and Housing Removed
(Task 2–48)
Inlet Housing Cover Assembly Removed
(Task 2–53)
Overspeed Drive and Outlet Cover Assembly
Removed (Task 5–17)
Output Shaft Removed (Task 9–6)
WARNING
Lubricating oils (E32 and E33) cause pa-
ralysis if swallowed. Prolonged contact
with them may irritate the skin. Handle
only in well–ventilated areas away from
heat and flame. Drain and store in ap-
proved metal containers. Avoid pro-
longed or repeated contact with skin
and do not take internally. Wash con-
tacted areas of skin thoroughly after
handling. If irritation of skin results, get
medical attention. Get medical attention
for eyes.
