TM 55-2840-254-23
2-74 INSTALL HOSE ASSEMBLY (INTERSTAGE AIR-BLEED ACTUATOR TO
2-74
FUEL CONTROL) (Continued)
3.
4.
Install two clamps (7) on hose assembly (1),
and install two bolts (8). Lockwire bolts (8). Use
Iockwire (E29).
NOTE
For hose assembly without water wash kit P/N
2-200-371-54 perform step 4. and omit step 5.
For hose assembly with water wash kit installed
omit step 4. and perform step 5.
Install clamp (9) on hose assembly (1), and
install screw (10) and nut (11).
GO TO NEXT PAGE
2 - 5 3
0
C h a n g e
5